Calculator Tools

Hourly Labor Cost Calculator

Find what an employee really costs per hour, not just what you pay them. Add payroll tax, benefits, paid leave, overtime and overhead to get the true hourly labor cost and the rate you need to charge.

Fully burdened rateUS, India, UK, Canada, AustraliaFree, no sign-up
Employee details
Loads the currency, a typical employer payroll tax rate and starter values. Every field stays editable.
Gross pay before employee deductions. Salary is converted to an hourly wage.
Contracted hours.
Used to turn days off into hours.
Public holidays, vacation and paid sick days. You pay for these hours but get no work.
Taxes and statutory contributions the employer pays on top of wages.
Employer-paid health cover, pension top-up and similar.

Schedule

52 for a full year.
Not paid, not worked.

Overtime and bonus

Average extra hours worked.
1.5 means time and a half. 1 if overtime is unpaid or at normal rate.
Annual bonus, commission or 13th-month pay as a share of base pay.

Other employer costs (per employee, per year)

Tools, uniform, software seats, training, recruitment.
Rent, admin, management time and utilities allocated to this person.

Pricing, team and job

Share of productive hours you can charge for.
Margin is a share of the price, not of cost.
Gives the labor cost and price of one job.
Same pay and schedule for all.
Gives the labor cost percentage for the whole team.

Last updated 3 November 2026. Tax and benefit figures are typical starting points, not legal or payroll advice. Replace them with your own numbers.

How to use the hourly labor cost calculator

Four steps and no sign-up. Use Quick mode for the true cost of one employee in under a minute. Open Advanced for overtime, bonus, overhead, a billable rate, a whole team and a single job.

1

Choose a country and enter pay

Pick your country to load the currency, a typical employer payroll tax and starter values. Then type the wage per hour, per month or per year.

2

Enter the schedule

Add weekly hours, working days per week and paid days off. Paid leave is paid time that produces no work, so it raises your cost per productive hour.

3

Add employer costs

Enter payroll tax or statutory contributions as a percentage, and benefits as a monthly amount. Replace the starter values with your own payroll figures.

4

Read, compare and price

See the true hourly labor cost, the annual cost and the multiplier over the wage. In Advanced, add a billable share and margin to get the rate to charge.

Why this calculator is more complete

Most labor cost calculators add a few costs and stop. This one models the full year, hour by hour, so the answer matches what shows up in your accounts.

Cost per productive hour

Divides the whole yearly cost by the hours actually worked, not by hours paid. Holidays, vacation and sick days are included, not ignored.

Real overtime maths

Enter overtime hours and a multiplier such as 1.5. Overtime pay, and the tax on it, are added to the total and to the productive hours.

Country presets

US, India, UK, Canada and Australia each load a typical payroll tax rate, working week and paid leave. All of it is editable.

Billable rate and margin

Turn cost into a price. Set the share of hours you can bill and the profit margin you want, and get the hourly rate to charge.

Team, revenue and job cost

Multiply across a team, see labor cost as a percentage of revenue, and cost a single job or project by its hours.

What-if tables

See at once how overtime, paid leave, payroll tax and profit margin change your numbers. No re-typing.

Wage rate, true labor cost and billable rate

People use "hourly labor cost" for three different numbers. Mixing them up is the most common way a business underprices its work. They answer three different questions.

NumberWhat it includesQuestion it answers
Wage ratePay per hour on the contract or payslip.What do I pay per hour?
True hourly labor cost (burdened rate)Wages, paid leave, overtime, bonus, payroll tax, benefits, other costs and overhead, divided by hours actually worked.What does an hour of work really cost me?
Billable rateTrue labor cost per billable hour plus the profit margin you want.What must I charge per hour to make money?

For a US employee on $20.00 an hour with a standard schedule, those three numbers are $20.00, $25.18 and $31.48 (at a 20% margin). The true cost is 1.26x the wage, and the gap is what a wage-only calculation misses.

The hourly labor cost formula

  1. Scheduled hours = hours per week x paid weeks.
  2. Productive hours = scheduled hours - paid leave hours - unpaid leave hours + overtime hours.
  3. Wages = hourly wage x (scheduled hours - unpaid leave hours). This includes paid leave, because you pay for it.
  4. Overtime pay = overtime hours x hourly wage x overtime multiplier.
  5. Payroll tax = tax rate x (wages + overtime pay + bonus).
  6. Total annual cost = wages + overtime pay + bonus + payroll tax + benefits + other direct costs + overhead.
  7. True hourly labor cost = total annual cost / productive hours.
  8. Billable rate = (total annual cost / billable hours) / (1 - profit margin).

A salary is converted first: annual salary / scheduled hours gives the hourly wage. A monthly salary is multiplied by 12 first.

Worked example: US employee at $20.00 an hour

Assume 40 hours a week, 52 weeks, 15 paid days off, a 10% employer payroll tax and $300 a month in benefits.

StepWorkingResult
Scheduled hours40 x 522,080 hours
Paid leave hours15 days x 8 hours120 hours
Productive hours2,080 - 1201,960 hours
Wages for hours worked$20.00 x 1,960$39,200
Wages for paid leave$20.00 x 120$2,400
Employer payroll tax (10%)10% x ($39,200 + $2,400)$4,160
Benefits$300 x 12$3,600
Total annual costSum of the above$49,360
True hourly labor cost$49,360 / 1,960$25.18

What counts as labor cost

Labor cost is more than pay. Group every cost of having someone work for you into direct and indirect labor cost.

CostTypeWhere to enter it
Base wages or salaryDirectPay
Paid holidays, vacation and sick leaveDirectPaid days off
Overtime, including the premiumDirectOvertime hours and multiplier
Bonus, commission, 13th-month payDirectBonus
Employer payroll tax and statutory contributionsDirect, on-costEmployer payroll tax
Health insurance, pension top-up, allowancesDirect, on-costBenefits per month
Tools, uniform, software seats, training, recruitmentDirectDirect costs
Rent, utilities, admin, management timeIndirectOverhead share

Employer payroll tax by country

The calculator loads a typical employer-side rate for each country. These are starting points that you should check against your own payroll, because they depend on pay level, state or province, industry and employee eligibility.

CountryPresetWhat the preset stands forCheck with
United States10%Employer Social Security and Medicare of 7.65% plus federal and state unemployment tax. Workers' compensation insurance is extra.IRS and your state agency
India13%Employer Provident Fund of 12% plus small admin charges. ESI (3.25% for eligible lower-paid staff), gratuity and statutory bonus can add more.EPFO, ESIC and your payroll provider
United Kingdom15%Employer National Insurance of 15% above the £5,000 secondary threshold. Workplace pension contributions are extra.HMRC
Canada9%Employer CPP and EI (employers pay 1.4 times the employee EI premium). Provincial payroll tax and workers' compensation vary.CRA and your province
Australia12%Superannuation guarantee of 12%. State payroll tax and workers' compensation are extra.ATO and your state revenue office
India note: under the new Labour Codes, allowances above 50% of total remuneration are counted as wages for contributions such as PF and gratuity. That can raise the PF base for staff with a low basic pay. Ask your payroll provider for the exact figure and use it in the payroll tax field.

How salary turns into an hourly cost

Dividing salary by 2,080 gives the wage rate, but the true cost per productive hour is higher. This table uses the US preset (10% payroll tax, $300 a month in benefits, 15 paid days off, 40-hour week).

Annual salaryWage rate per hourTrue cost per productive hourTotal annual costMultiplier
$30,000$14.42$18.67$36,6001.29x
$50,000$24.04$29.90$58,6001.24x
$75,000$36.06$43.93$86,1001.22x
$100,000$48.08$57.96$113,6001.21x

Overtime: the cost that surprises owners

Overtime costs more than the premium. The extra hours add overtime pay at the multiplier, plus payroll tax on it. Benefits and overhead do not grow with hours, so they spread thinner, which softens the rise. Even so, each overtime hour costs more than your average hour. In the example below an overtime hour costs $33.00 against an average of $25.18. The table shows a US employee on $20.00 an hour with time-and-a-half overtime.

Overtime hours per weekTrue cost per hourTotal annual costExtra cost per year
0 hours$25.18$49,360-
2 hours$25.56$52,594$3,234
4 hours$25.89$55,828$6,468
6 hours$26.20$59,062$9,702
8 hours$26.49$62,296$12,936
10 hours$26.75$65,530$16,170

Overtime rules differ by country and job type. Many places set a legal premium (for example 1.5x in the US for non-exempt staff) and limits on weekly hours. Check your local law.

Paid days off and the cost of leave

Every paid day off is a day you pay in full and get no work. More leave means fewer productive hours to share the same cost, so the cost per productive hour rises.

Paid days offProductive hoursTrue cost per productive hour
0 days2,080$23.73
10 days2,000$24.68
15 days1,960$25.18
20 days1,920$25.71
25 days1,880$26.26
30 days1,840$26.83

Billable rate, utilisation and profit margin

If you sell time (agencies, contractors, repair shops, consultants), the rate you charge must cover all labor cost for the hours you can actually bill, plus profit. Nobody bills 100% of their hours. Meetings, admin, training and quiet periods are all paid but not billable.

Margin is not markup. A 20% margin means profit is 20% of the price. That needs a 25% markup on cost. A 50% margin needs a 100% markup. Calculators that add "20% on top of cost" give you a 16.7% margin instead of 20%.

Profit marginMarkup on costBillable rate
10%11.1%$27.98
15%17.6%$29.63
20%25.0%$31.48
25%33.3%$33.58
30%42.9%$35.98
40%66.7%$41.97
50%100.0%$50.37

The share of billable hours matters even more. The table shows the rate needed for the US example at a 20% margin.

Billable share of hoursBillable hours per yearRate needed at 20% margin
100%1,960$31.48
90%1,764$34.98
80%1,568$39.35
70%1,372$44.97
60%1,176$52.47
50%980$62.96

Labor cost as a percentage of revenue

Labor cost percentage = total labor cost / revenue x 100. Enter your annual revenue in Advanced mode to see it. Typical ranges vary a lot by business, so use these only as a rough guide and compare against your own history.

Business typeRough labor cost share of revenue
Restaurants and cafes25% to 35%
Retail10% to 20%
Manufacturing10% to 30%
Construction and trades20% to 40%
Agencies and professional services50% to 70%

Employee or contractor: finding the break-even rate

An hourly contractor does not get paid holidays, benefits or employer taxes from you, so the rate looks high next to a wage. The fair comparison is the contractor rate against the employee's true hourly labor cost. For the US example, a contractor is cost-neutral at about $25.18 an hour for the same productive hours. Above that, the employee is cheaper on paper. Below it, the contractor is. Employment law decides who can be treated as a contractor, so check the rules where you operate.

Ten ways to lower your hourly labor cost

  1. Plan shifts to cut overtime. Four overtime hours a week add about $6,468 a year for one US employee at the example rate.
  2. Raise productive hours, not wages. Reducing idle time raises output without changing the pay bill.
  3. Schedule leave and holidays well. Leave is a cost you control only through planning and cover.
  4. Review benefits against use. Drop plans nobody uses and keep those that cut turnover.
  5. Cut turnover. Recruiting and training a replacement often costs several months of pay.
  6. Cross-train staff so absence does not force costly overtime or temps.
  7. Automate repetitive tasks that eat paid but non-billable hours.
  8. Raise your billable share with better scheduling and fewer unbilled tasks.
  9. Check payroll tax classification and any credits or incentives you qualify for.
  10. Track actuals monthly and compare them with this estimate, then fix the gaps.

Common mistakes when costing labor

  • Using the wage rate as the cost per hour.
  • Dividing by paid hours instead of productive hours.
  • Forgetting that paid leave is a cost with no output.
  • Applying a flat markup and calling it a margin.
  • Leaving overhead out, then wondering why profit is thin.
  • Assuming 100% of hours can be billed.
  • Ignoring payroll tax on overtime and bonuses.
  • Copying another country's payroll tax rate.
  • Using last year's rates after a law change.
  • Treating the estimate as a quote or a payroll run.

Limits of this calculator

  • It gives an estimate from the inputs you enter. It is not payroll software, tax advice or legal advice.
  • Payroll tax is applied as one flat percentage. Real systems have caps, thresholds and bands that vary by income and state or province.
  • All employees in the team are assumed to have the same pay and schedule.
  • Starter values for each country are typical, not universal. Update them with your own records.
  • It does not model employee deductions, take-home pay, severance or termination costs.

Sources and method

The method follows standard cost accounting: total employer cost divided by productive hours, with margin applied to the price. Rates and thresholds in the country table were reviewed on 3 November 2026 against published payroll guidance and should be confirmed with the official bodies: IRS (US), EPFO (India), HMRC (UK), CRA (Canada) and ATO (Australia). Rates change, so check before relying on them.

Related Kalikolom tools: the Electric Scooter Running Cost Calculator shows cost per km for delivery fleets, and the Petrol vs Electric Scooter Calculator compares fuel and running costs. Browse all Kalikolom tools.

Frequently asked questions

What is hourly labor cost?

Hourly labor cost is what one hour of an employee's work costs your business. The simple version is the wage rate. The useful version, called the true or fully burdened rate, adds paid leave, employer payroll tax, benefits, overtime, bonus and overhead, then divides by the hours actually worked.

How do I calculate the hourly labor cost of an employee?

Add every yearly cost of the employee: wages, paid leave, overtime pay, bonus, employer payroll tax, benefits, other direct costs and overhead. Divide the total by productive hours, which are scheduled hours minus leave plus overtime. For a US employee on $20.00 an hour with 15 paid days off, 10% payroll tax and $300 a month in benefits, the total is $49,360 over 1,960 productive hours, or $25.18 an hour.

What is a fully burdened labor rate or labor burden?

The burden is everything you pay on top of the wage to employ someone: payroll taxes, benefits, paid leave, insurance and overhead. The fully burdened rate is the wage plus the burden, expressed per productive hour. The burden multiplier is the burdened rate divided by the wage. In this calculator the US example gives a multiplier of 1.26.

How much does an employee earning $15 an hour really cost?

With the US preset (40-hour week, 15 paid days off, 10% payroll tax and $300 a month in benefits), a $15 an hour employee costs about $19.35 per productive hour and $37,920 a year. That is 1.29 times the wage. Your own figure changes with your benefits and tax.

How do I convert a salary into an hourly labor cost?

First divide the annual salary by scheduled hours (40 x 52 = 2,080) to get the wage rate. Then add the on-costs and divide by productive hours. On the US preset, a $50,000 salary is a wage of $24.04 an hour but costs $29.90 per productive hour, or $58,600 a year in total.

Why is the true hourly cost higher than the wage?

Because you pay for more than the hours worked. Paid leave is wages with no output, payroll tax and benefits are extra on every employee, and overhead has to be covered by someone's hours. All of that cost is shared across fewer productive hours, so the cost of each hour of work is higher than the wage.

How is overtime included in the calculation?

Enter overtime hours per week and a multiplier in Advanced mode. The calculator adds overtime pay (hours x wage x multiplier), adds payroll tax on it, and adds the overtime hours to productive hours. For four overtime hours a week at 1.5x, the US example costs about $6,468 more a year.

Are paid holidays, vacation and sick days included?

Yes. They are paid in full, so they are part of your cost. They also reduce productive hours, so they raise the cost per hour of actual work. Unpaid days off are handled separately and are not paid.

What is a typical labor cost multiplier?

Many US employers see a total employment cost of around 1.2 to 1.4 times the wage, but it depends on benefits, leave, taxes and overhead. Companies with generous benefits or heavy overhead can be higher. Use your own numbers rather than a rule of thumb.

What is the difference between margin and markup?

Margin is profit as a share of the price. Markup is profit as a share of the cost. A 20% margin equals a 25% markup, and a 50% margin equals a 100% markup. If you add 20% to your cost, your margin is only 16.7%.

How do I calculate a billable rate?

Divide total annual labor cost by billable hours to get the cost per billable hour. Then divide by (1 - margin). For the US example at 100% billable time and a 20% margin, the rate is $31.48 an hour. At 70% billable time it rises to $44.97.

What is billable utilisation and what should it be?

Utilisation is the share of productive hours you can charge to clients. Meetings, admin, training and downtime are paid but not billable. Targets differ by trade and role, so use your own time records. The lower the share, the higher the rate you need to charge.

How do I calculate labor cost percentage?

Divide total labor cost by revenue and multiply by 100. Enter annual revenue and a number of employees in Advanced mode and the calculator does it for you. Compare the result with your own history and with the rough ranges in the table above.

What is a good labor cost percentage?

It depends on the business. Restaurants often run around 25% to 35%, retail and manufacturing lower, and agencies and professional services much higher because labor is what they sell. A good number is one that leaves you your target profit.

How do I calculate labor cost for a project or job?

Multiply the job hours by the true hourly labor cost. For a price, multiply the same hours by the billable rate. Enter the job hours in Advanced mode to see both. Add materials and other direct job costs separately.

Is labor a fixed or variable cost?

It is usually semi-variable. Salaried staff are a fixed cost in the short run. Hourly and overtime labor changes with activity, so it behaves like a variable cost. Many businesses have a fixed core team plus variable hours.

Is it cheaper to hire an employee or a contractor?

Compare the contractor's hourly rate with the employee's true hourly labor cost. For the US example the break-even is about $25.18 an hour. A contractor charging less is cheaper on paper, but employment law decides who may be treated as a contractor, so check your local rules.

How do I calculate labour cost in India with PF and ESI?

Choose India in the country list, enter the monthly salary, and set employer on-costs. The preset uses 13% for employer PF and admin. Add ESI (3.25% for eligible employees), gratuity and statutory bonus if they apply, either in the payroll tax rate or as benefits. On the India preset, ₹25,000 a month for a 48-hour, 6-day week costs about ₹147.14 per productive hour.

Does this calculator work for the UK, Canada, Australia and other countries?

Yes. Pick the country to load its currency and a typical employer payroll rate. For any other country, choose Other and enter your local rates. The maths is the same everywhere. Only the rates, leave and working week differ.

Is overhead part of labor cost?

Direct labor cost covers wages and on-costs. Overhead such as rent, admin and management time is indirect. For pricing you need to recover both, so the Advanced mode lets you add an overhead share per employee. Leave it at zero if you only want direct labor cost.

How can I reduce my hourly labor cost?

Cut avoidable overtime, raise productive and billable hours, plan leave and cover, review unused benefits, reduce turnover, cross-train staff and automate repetitive tasks. Use the what-if tables to see what each change is worth before you act.

How accurate is this hourly labor cost calculator?

The maths is exact for the inputs you give it. The accuracy of the answer depends on those inputs. Payroll tax is applied as a flat rate, while real systems have caps and thresholds. Use your payroll records for the most precise result, and treat the output as a planning estimate, not payroll or tax advice.