Finance Tools

3D Printer Buy vs Outsource Calculator

Should you buy a 3D printer or order prints from a service? Enter your volume and one quote to see your cost per part, the break-even month and your savings over time. Works in 12 currencies, for FDM and resin.

Updates as you type12 countries and currenciesFree, no sign-up
Your comparison

Where and what you print

Count each separate part. Use 1 for one part a month, or 0.5 for one every two months.
Weight of one part from your slicer, supports included.
From your slicer. Faster printers print the same part in less time.

Option 1: Buy a printer

Pick a class to fill price, power, speed and upkeep, or choose Custom.
Street price including tax and shipping.
Price of one kilogram of material.
The rate on your own bill.
Scraper, spare nozzles, build plate, filament dryer or resin wash kit.
Typical desktop FDM printers draw 90 to 150 W on average.
Share of prints that fail and are reprinted. 5 to 12% is common.
Nozzles, belts, build plates, FEP film, cleaning supplies.
After this many print hours a replacement is added.
Share of the printer price you expect to recover. Leave 0 to ignore.
Slicing, starting, removing supports and cleaning.
Leave 0 if printing is a hobby. Enter your rate if it is work.

Option 2: Outsource to a print service

A real quote for one part of this size and material.
VAT or GST, if the quote is shown without it.
Delivery fee for one order.
Fewer, larger orders spread shipping better.

Time frame and capacity

Used for a capacity check. 200 is about 7 hours a day.

Last updated 2 November 2026. Default prices are indicative and fully editable.

How to use the 3D printer buy vs outsource calculator

Four quick steps. No login and no download. Start in Quick mode and switch to Detailed when you want a number you can defend.

1

Choose your country

Pick where you are. Currency, electricity, filament price, service quote and shipping update to local defaults.

2

Describe what you print

Enter how many parts you need each month, the material weight per part in grams and the print time in hours.

3

Pick a printer and enter the quote

Choose a printer class or custom and adjust its price. Then type the price an outsourcing service quoted for one part.

4

Read the break-even and the sensitivity table

Check the monthly saving, the break-even month, the chart and how the answer changes with volume and service price. Switch to Detailed mode to add failures, upkeep, resale, tax and your time.

Should you buy a 3D printer or outsource? The short answer

Buy a printer when you will print often enough that the printer pays for itself before it wears out, and outsource when you print rarely or need materials a desktop machine cannot handle. The tricky part is knowing where that line is for you. This calculator finds it with three numbers that you can check against your own quotes.

  • Cost per part. What one part costs on your own printer, including failed prints and the printer cost spread over your chosen period, against the price of the same part from a service including shipping.
  • Break-even. The month when the money you saved by printing yourself has repaid the printer and kit. It is shown in months and in number of parts.
  • Total saving. The difference in total cost over your chosen period, after resale value and any replacement printer.

With the India defaults on this page (₹300 for a 60 g part from a service, a ₹26,000 compact printer and 10 parts a month) the printer breaks even after about 13 months and saves around ₹64,772 over 36 months. At only 2 parts a month it takes 51 months, which is why volume is the first thing to check.

How the calculator works

The maths is simple, and every step is visible in the results so you can check it.

  • Attempts per good part = 1 ÷ (1 − failure rate). With 10% failures, each good part needs about 1.11 attempts. Material, electricity and upkeep are multiplied by this.
  • Own cost per part = material + electricity + upkeep + your time. Material is grams × price per kg ÷ 1,000. Electricity is watts ÷ 1,000 × hours × your rate.
  • Outsourcing cost per part = quoted price (per part, or per gram × grams) × (1 + tax) + shipping spread across the parts in each order.
  • Monthly saving = outsourcing cost per month − own running cost per month.
  • Up-front cost = printer price + tools and starter kit.
  • Break-even month = the first month when cumulative outsourcing spend is at least cumulative ownership spend. If your volume uses up the printer’s expected life, a replacement printer is added to the ownership line.
  • Total saving over your chosen period includes any resale value of the printer at the end.

Printing hours per month are parts × print time × attempts per good part. The calculator compares that with the hours you say your printer can run. If you need more, it warns you and shows a hybrid plan where you print what fits and outsource the rest.

What this calculator includes that basic ones skip

Many online buy-or-outsource tools add the printer price, filament and electricity and stop there. That is a fair first pass, but it often makes owning look cheaper than it is, or hides the point where owning stops making sense. Here is what we add.

  • Failed prints. Real printers fail. The calculator reprints the failures and charges you for the extra material, power and wear.
  • Upkeep and printer life. Nozzles, belts, plates, FEP film and cleaning supplies wear out. Past the printer’s expected hours, a replacement is added.
  • Resale value. A used printer is worth something. You can credit it at the end of your period.
  • Shipping per order and tax. Services charge delivery and often quote before VAT or GST. Both are modelled, along with a price per part or per gram.
  • Your time, as a what-if. Most people ignore it. The result shows what happens to break-even if your time had a price.
  • Printer speed. Faster printers finish the same part in fewer hours, which cuts electricity and wear and raises capacity.
  • Capacity check and hybrid plan. One printer can only run so many hours. If you need more, the tool says so.
  • Sensitivity table. A grid of break-even months across five service prices and five volumes, so you can see how close the decision is.
  • 12 currencies and local defaults. Prices, electricity and service quotes change by country, so defaults do too.

Worked example: a compact printer in India

These are the defaults you see when the page loads. A ₹26,000 compact fast FDM printer with a ₹5,100 kit, 10 parts a month, 60 g and 2.5 hours per part, 6% failed prints, ₹1,000 per kg filament, ₹7 per kWh, and a service quote of ₹300 per part plus ₹16 shipping per order for two orders a month.

Cost per partOwn printerOutsource
Material₹60.00–
Electricity₹1.58–
Upkeep and consumables₹5.50–
Failed prints₹4.28–
Printer and kit, 36 months, after resale₹64.72–
Service price–₹300
Shipping–₹16
Total per part₹136.08₹316.00

That is a saving of about ₹2,446 a month. The up-front cost is ₹31,100, so the printer breaks even in about 13 months (around 128 parts). Over 36 months the saving is about ₹64,772 after the printer’s resale value. If your time were worth ₹150 an hour at 10 minutes per part, break-even moves to about 15 months. Printers for this volume use about 27 print hours a month, well inside a 200 hour capacity.

Volume changes the answer

Same printer and quote, different monthly volume:

Parts per monthBreak-evenMonthly saving
251 months₹617
524 months₹1,303
1013 months₹2,446
207 months₹4,733
404 months₹9,306

The service price matters just as much

Service price per partBreak-evenVerdict
₹15033 monthsClose call
₹22519 monthsBuy
₹30013 monthsBuy
₹4508 monthsBuy
₹6006 monthsBuy

A pricier printer needs more volume

A faster, enclosed or larger printer prints quicker and fails less, but costs more up front. At 10 parts a month with the same quote, the payback looks like this:

Printer classPriceBreak-evenOwn cost per part
Budget FDM printer (Ender-3 V3 SE class)₹18,00010 months₹133.35
Compact fast FDM (Bambu Lab A1 mini class)₹26,00013 months₹136.08
Mainstream fast FDM (Bambu Lab A1 class)₹48,00023 months₹182.35
Enclosed fast FDM (Bambu Lab P1S class)₹77,00035 months₹231.27
Prosumer FDM (Prusa MK4S class)₹96,00042 months₹248.99
Resin printer (Elegoo Mars / Anycubic Photon class)₹32,00014 months₹219.10

The same inputs in US dollars ($12 service quote, $200 printer) break even in about 3 months at 10 parts a month, and 8 months at 2 parts a month. Cheap services or very low volumes can flip the answer, so always use your own quote.

When to buy, when to outsource, and when to do both

Your situationUsually betterWhy
1 to 2 parts a month, one-off prototypesOutsourceThe printer sits idle and never pays back.
5 to 10 parts a month, frequent design changesBuyFast iteration and low cost per part.
Need nylon, metal, fine resin detail or tight toleranceOutsource those partsServices run industrial machines.
Selling printed products or small batchesBuy, outsource overflowLow cost per part and control of lead time.
Parts larger than a desktop build volumeOutsource or split partsLarge printers cost far more to own.
Classroom, makerspace or learningBuyLearning and access matter as much as cost.
Volume above one printer’s monthly hoursHybridPrint some yourself, outsource the rest.

Hidden costs of owning a printer

  • Learning time. Expect weeks to get reliable results, and a higher failure rate while you learn.
  • Hands-on minutes. Slicing, starting prints, removing supports and cleaning add up for every part.
  • Space, noise and safety. FDM needs a stable surface and some ventilation. Resin needs gloves, a ventilated area and safe disposal of waste.
  • Spare parts and upgrades. Budget for nozzles, plates, belts and the occasional repair.
  • Design work. Whether you print or outsource, you still need a file. Buying a printer does not create designs.

Hidden costs of outsourcing

  • Minimum order fees and shipping. Small orders can cost far more per part than a headline price.
  • Waiting. Turnaround is usually days, which slows every design change.
  • Paying for every iteration. A test print on your own printer costs a little material, but at a service every revision is a new order.
  • Confidentiality. Sending files to a third party can matter for unreleased designs.
  • Quality variation. Different services and machines produce different finish and tolerance.

Default prices by country

The calculator starts with indicative values for a compact fast FDM printer, standard PLA filament, home electricity and a typical online service quote for a 60 g part. They are not live prices. Replace them with your own bill, a real printer quote and a real service quote.

CountryCurrencyCompact FDM printerFilament per kgElectricity per kWhService quote, 60 g partShipping per order
IndiaINR₹26,000₹1,000₹7.00₹300₹80
United StatesUSD$200$20$0.17$12$6
United KingdomGBP£190£18£0.28£10£5
GermanyEUR€220€20€0.38€11€6
FranceEUR€220€20€0.26€11€6
NetherlandsEUR€220€20€0.30€11€6
ItalyEUR€220€20€0.30€11€6
SpainEUR€220€20€0.22€10€6
JapanJPY¥33,000¥2,800¥31¥1,800¥800
AustraliaAUD$350$28$0.32$18$10
CanadaCAD$300$26$0.15$16$9
ChinaCNYCN¥1,300CN¥85CN¥0.55CN¥25CN¥8

Electricity and filament are the cheaper part of the story in most countries. Printer cost and the service quote decide the answer. If your electricity price is unusual, check it on your bill. Readers in West Bengal can estimate their unit rate with our WBSEDCL Electricity Bill Calculator, and if you have rooftop solar, the Solar Bill Calculator shows how net metering changes the cost of running a printer.

3D printing costs in India

In India, imported printers carry duty and GST, so street prices are higher than the same model in the United States. Filament is commonly sold around ₹800 to ₹1,500 per kg for PLA and PETG, and household electricity is often around ₹7 per unit, though it varies by state and slab. Failure rates for beginners can be 20 to 30% for the first months and fall under 10% with experience. Online and local services typically quote per part, per gram or per hour, often with a minimum charge, and may quote before GST, so enter the tax in Detailed mode if your quote excludes it. Get two or three quotes for your own files before deciding.

If you sell printed items online, our WebP Converter and Compress Image to 200KB tool help you prepare light, fast product photos for your listings.

Prefer another payback decision? The same break-even method is used in our Petrol vs Electric Scooter Calculator and Electric Scooter Savings Calculator.

How to cut your 3D printing cost

  • Reduce material per part. Lower infill, fewer walls and smart orientation can cut grams, and supports, a lot.
  • Cut failures. Level the bed, dry filament, and print a test part before long jobs. Each percent of failure adds to every cost.
  • Batch your outsourcing. One large order spreads shipping and often avoids minimum fees.
  • Match the printer to the job. A faster printer saves hours and power, but only pays off at higher volumes.
  • Buy used carefully. A second-hand printer lowers the up-front cost. Enter the used price and a higher failure rate.
  • Hybrid is fine. Print what you can and outsource what you cannot.

Where the defaults come from

Printer prices are approximate street prices for each printer class, converted into local currency with an estimate of local tax and shipping. India filament, electricity, power draw and failure-rate ranges come from published Indian cost guides such as Zbotic’s 3D printing cost guide, and printer prices in US dollars were checked against buying guides such as Print3DBuddy’s 2026 beginner printer guide. Service quotes vary widely and are the least certain default, so treat them as a placeholder and replace them with a real quote. Values were reviewed on 2 November 2026. Printer model names are used only to describe price classes and belong to their owners.

Frequently asked questions

Is it cheaper to buy a 3D printer or outsource 3D printing?

It depends on how many parts you need and what the service quotes. Buying has a fixed cost (printer and kit) and a very low cost per part. Outsourcing has no fixed cost but a higher price for every part. With the India defaults (₹300 per 60 g part from a service, about ₹136.08 per part on your own printer once the printer cost is spread out) a ₹26,000 printer breaks even in about 13 months at 10 parts a month. At 2 parts a month it takes 51 months, so outsourcing wins. Enter your own volume and quote to see your answer.

How do I calculate the break-even point of a 3D printer?

Divide the money you spend up front (printer plus tools and starter kit) by the monthly saving. The monthly saving is what outsourcing would cost for your parts minus what it costs to run your own printer for those parts (material, electricity, upkeep, failed prints and any time you value). The calculator does this month by month, so it also adds a replacement printer if you reach the printer's expected life, and it shows the break-even in months and in number of parts printed.

How many parts per month do I need to print before buying makes sense?

As a rule of thumb, buying starts to make sense once you would order about 5 to 10 parts a month, or you iterate on designs often. With the India defaults the break-even falls from 24 months at 5 parts a month to 7 months at 20 parts a month. The sensitivity table under your result shows how break-even changes with both your volume and the service price, so you can see how close the decision is.

What costs does this calculator include that others leave out?

Most basic comparisons add up the printer price, filament and electricity. This one also includes failed prints, upkeep and consumables per 100 print hours, the printer's expected life and the cost of a replacement, resale value, shipping per order, tax on the service quote, an optional value for your own time, and a capacity check that warns you when your volume needs more print hours than one printer can run. It also shows a sensitivity table and a chart.

How much does it cost to run a 3D printer per part?

For a typical 60 g part, material is the biggest running cost and electricity is small. In the India default, material is ₹60.00, electricity ₹1.58 and upkeep ₹5.50 per part. Once failed prints are added the cash cost to run the printer is about ₹71.36 per part, before the cost of the printer itself. A printer drawing 100 W for 10 hours uses just 1 kWh.

What failure rate should I use?

A tuned modern printer typically wastes 3 to 12% of prints. Beginners can see 20 to 30% in the first months while they learn bed levelling, drying filament and slicer settings. Resin printing also has a higher failure rate for tall or unsupported parts. The calculator uses 5 to 12% by default depending on the printer and scales material, electricity and upkeep by the number of attempts per good part.

Should I count my own time?

If 3D printing is a hobby and you enjoy it, your time may be free, and Quick mode leaves it at zero. If you use it for work, count it: slicing, starting prints, removing supports and cleaning all take minutes per part. Open Detailed mode and enter the minutes of hands-on work per part and your hourly value. The result panel also shows a what-if line with a default hourly value so you can see how much it changes the break-even.

Does the calculator work for resin printers?

Yes. Choose the resin preset and it switches the material to resin, raises the upkeep (FEP film, isopropyl alcohol, gloves and screens), adds an allowance for a wash and cure kit, and uses a higher service price. You can edit every value. Remember that resin needs ventilation, gloves and careful disposal, which are costs of owning that a number cannot fully capture.

How much do 3D printing services charge?

Prices vary a lot by country, material, technology and order size. Many services price per part and add a minimum order fee and shipping, while some price per gram or per print hour. Always get two or three quotes for your real files. This tool accepts either a price per part or a price per gram, adds optional tax, and spreads shipping over your orders.

What if I need materials or accuracy my own printer cannot give?

Desktop printers are excellent for prototypes, jigs, enclosures and many finished parts, but services can offer nylon, resin with fine detail, powder-bed processes and metal. If you need those, outsource those parts and print the rest yourself. The capacity and hybrid note in the results helps you split the work.

Can I use this calculator outside India?

Yes. Choose your country and the currency, number format, electricity price, filament price, typical service quote and shipping update. It covers India, the United States, the United Kingdom, Germany, France, the Netherlands, Italy, Spain, Japan, Australia, Canada and China. All values are indicative and fully editable.

Is buying a 3D printer worth it for a small business or an online shop?

If you sell printed products or make small batches, a printer often pays back quickly, because your cost per part is so low and you control lead time and design changes. Keep an outsourcing option for overflow and specialty parts. Use Detailed mode to add your time, and compare your cost per part with the price you charge to check your margin.

Related tools

All finance tools

More tools

View all tools