Bags and price
Bag yields differ by brand. Pick your bag size, or choose Custom and type the yield from the label. Add a price to see the cost.
Estimates only. Bag yields, soil and fence design change what you need, so buy a little extra and check your bag label and local code.
How to calculate concrete for post holes
Three steps. Everything updates as you type.
Choose the post
Pick 4×4, 4×6, 6×6 or a round post, or enter a custom size. Set the number of posts. The hole is set to three times the post width unless you choose Custom.
Set depth and base
Enter the hole depth, the gravel under the post and how far below ground you stop the concrete. Add the fence height to see a suggested depth.
Pick your bag
Choose 80 lb, 60 lb, 50 lb, 25 kg or 20 kg bags, or enter the yield from your label. You get the bags to buy, the concrete per post and the cost.
How much concrete does a post hole need?
A post hole is a small cylinder or box with the post standing in it, so the concrete is whatever is left over. Find the volume of the hole, take away the post, take away the gravel and the empty space at the top, then divide by the yield of your bags.
For a round hole the area is π × (diameter ÷ 2)². For a square hole it is the side squared. A 4×4 post is really 3.5 × 3.5 inches, so the calculator uses that for the post area, and the nominal 4 inches for the three-times-wider hole rule.
Worked example. A 4×4 post in a 12 inch round hole that is 36 inches deep, with 4 inches of gravel and 3 inches left empty, takes about 1.69 cubic feet of concrete. That is about 2.8 bags of 80 lb mix, or 4.5 bags of 50 lb mix, per post. For ten posts with 10% extra you would buy about 32 bags of 80 lb mix.
Set the gravel and the empty top space to 0 to see the plain hole-minus-post figure. A square 12 × 12 inch hole 36 inches deep with a 4 inch square post is 0.10 cubic yards on that basis.
Quick reference: concrete per fence post
Round hole, 4 inches of gravel, 3 inches left empty, no extra. Bags are per post. The calculator gives the exact figure for your own sizes.
| Post and hole | Hole depth | Concrete (ft³) | 80 lb bags | 60 lb bags | 50 lb bags |
|---|---|---|---|---|---|
| 4×4 post, 12 in hole | 24 in | 0.99 | 1.7 | 2.2 | 2.6 |
| 4×4 post, 12 in hole | 30 in | 1.34 | 2.2 | 3.0 | 3.6 |
| 4×4 post, 12 in hole | 36 in | 1.69 | 2.8 | 3.8 | 4.5 |
| 6×6 post, 18 in hole | 24 in | 2.21 | 3.7 | 4.9 | 5.9 |
| 6×6 post, 18 in hole | 30 in | 2.98 | 5.0 | 6.6 | 8.0 |
| 6×6 post, 18 in hole | 36 in | 3.76 | 6.3 | 8.4 | 10.0 |
How big should a post hole be?
Most guides dig the hole about three times as wide as the post. That gives a 12 inch hole for a 4×4 and an 18 inch hole for a 6×6. A wider ring of concrete holds the post better in soft soil.
How deep should a post hole be?
A common rule is to bury the post one-third to one-half of its above-ground height. For a six-foot fence that is about 2 to 3 feet. Dig deeper in soft ground and windy sites, and set corner, gate and strainer posts deeper in wider holes. Check local code, and call your utility locating service before you dig.
Gravel at the bottom and the top of the hole
Many guides put about 3 to 6 inches of compacted gravel at the bottom so water can drain away from the base of the post. They also stop the concrete a few inches below ground level so soil or turf can cover it. Both reduce the concrete you need, which is why the calculator has a gravel input and an empty-top input.
Post hole concrete in Australia, New Zealand and the UK
Switch to metric and the calculator uses 20 kg and 25 kg bags. A 20 kg bag of premix typically yields about 0.011 cubic metres. A common fence layout is a 100 mm post in a 300 mm hole about 600 mm deep. With 100 mm of gravel and 80 mm left empty that takes about 25 litres per post, or 2.3 bags of 20 kg mix. Check your bag label, because yields differ.
Related calculators
Pouring a slab as well? Try the Concrete Driveway Calculator or the Gravel Under Concrete Slab Calculator. To find out how heavy a pour is, use the Concrete Weight Calculator.
Frequently asked questions
How much concrete do I need for a fence post?
Work out the volume of the hole, subtract the volume of the post, and take off any gravel at the bottom and the space you leave empty at the top. For a 4×4 post (3.5 inches actual) in a 12 inch round hole that is 36 inches deep, with 4 inches of gravel and 3 inches left empty, you need about 1.69 cubic feet per post.
How many bags of concrete do I need for a 4×4 fence post?
For the same hole you need about 2.8 bags of 80 lb mix, 3.8 bags of 60 lb mix or 4.5 bags of 50 lb mix per post. For ten posts with 10% extra that is about 32 bags of 80 lb mix. Bag yields vary by brand, so check your bag label.
How big should a fence post hole be?
A common rule is to dig the hole about three times as wide as the post. That makes a 12 inch hole for a 4×4 post and an 18 inch hole for a 6×6 post.
How deep should a fence post hole be?
Most guides bury a post one-third to one-half of its above-ground height. For a six-foot fence that is about 2 to 3 feet, and a 36 inch deep, 12 inch wide hole is a common example. Dig deeper in soft soil and windy sites, check local code, and call your utility locating service before you dig.
Should I put gravel at the bottom of a post hole?
Many guides add about 3 to 6 inches of compacted gravel at the bottom so water can drain away from the base of the post. The calculator subtracts it from the concrete depth. Set the gravel to 0 if you do not use any.
Can I pour dry concrete mix into a post hole?
Some guides say you can pour the dry mix into the hole and add water on top, while others mix it first. One guide suggests about a gallon of water for each 50 lb bag. Follow the instructions printed on your bag, because they depend on the product.
Does the calculator subtract the volume of the post?
Yes. The post takes up room in the hole, so the concrete you need is the hole volume minus the buried part of the post. A 4×4 is really 3.5 × 3.5 inches, so the calculator uses the actual size for volume and the nominal size for the three-times-wider hole rule.
Is a round or a square hole better?
Both are used. A round hole from an auger uses less concrete than a square hole of the same width. Switch the hole shape in the calculator to compare them.
Why is my result different from another calculator?
Some calculators ignore the gravel and the empty space at the top, and treat a 4×4 as a full 4 inches. A square 12 × 12 inch hole that is 36 inches deep with a 4 inch square post takes 0.10 cubic yards on that basis. Set gravel and the empty space to 0 to compare like for like.
How many 20 kg bags of concrete for a post hole in Australia, New Zealand or the UK?
A 20 kg bag of premix typically yields about 0.011 cubic metres. For a 100 mm post in a 300 mm round hole that is 600 mm deep, with 100 mm of gravel and 80 mm left empty, you need about 25 litres of concrete per post, or 2.3 bags of 20 kg mix.
Do corner and gate posts need more concrete?
Yes. Corner, gate and strainer posts carry more load, so set them deeper and in wider holes. Enter their size separately in the calculator.
How much does it cost?
Enter the price of a bag and the calculator multiplies it by the number of bags. Prices differ by brand, bag size and region, so use the price from your supplier.
Is my data stored or uploaded?
No. The calculation runs in your browser and nothing you type is sent to a server.