Home/Tools/Concrete Driveway Calculator
Calculator Tools

Concrete Driveway Calculator

Enter your driveway size to get the concrete you need in cubic yards, bags and truck loads, plus the gravel base, reinforcement and an estimated materials cost.

Runs in your browserYards, bags and costImperial and metricFree, no sign-up
By Kalikolom Tools · Last updated:
Units
Driveway size

A thickness of 4 in (10 cm) is common for cars. Heavier vehicles often call for 5 to 6 in (12.5 to 15 cm). Set the gravel base depth to 0 to leave the base out. The extra percentage is applied to the concrete, gravel and reinforcement.

Prices

The starting values are rough guides. Replace them with the figures from your own quotes.

Concrete to order— 

Concrete
Base and reinforcement
Estimated materials cost
ItemQuantityUnit priceCost

    Estimates only. Real quantities depend on your site, the mix and your supplier. Confirm the amounts and prices with a local contractor or supplier before you order.

    Quick guide

    How to calculate concrete for a driveway

    Three steps. Everything updates as you type.

    1

    Enter the size

    Type the length and width. If the driveway is L-shaped or has a wider apron, press Add section and enter each rectangle. Or switch to Area only if you already know the total.

    2

    Set the build

    Choose the slab thickness, gravel base depth and reinforcement. Keep the 10% extra for spills and uneven ground, or change it.

    3

    Check prices and read the result

    Update the prices to match your quotes. You get cubic yards, bags, truck loads, base and steel quantities and a materials cost.

    How much concrete a driveway needs

    A driveway is a flat slab, so the maths is simple. Find the volume, then add a little extra, because ground is never perfectly level and some concrete is always lost to spills and uneven sub-base.

    Volume = Length × Width × Thickness

    Keep the units consistent. In imperial units, turn the thickness from inches into feet by dividing by 12, then divide the cubic feet by 27 to get cubic yards. In metric, convert the thickness to metres and the volume comes out in cubic metres.

    Worked example. A 20 ft × 12 ft driveway that is 4 inches thick has a volume of 20 × 12 × (4 ÷ 12) = 80 cubic feet, or 2.96 cubic yards. With 10% extra you would order about 3.26 cubic yards. In metric, a 6 m × 3.6 m driveway at 100 mm thick is 2.16 cubic metres, or 2.38 cubic metres with 10% extra.

    Quick reference: common driveway sizes

    Cubic yards of concrete, with the figure including 10% extra in brackets. Use the calculator for your exact size.

    Driveway sizeArea4 in thick (yd³)5 in thick (yd³)
    10 ft × 20 ft200 sq ft2.47 (2.72)3.09 (3.40)
    12 ft × 24 ft288 sq ft3.56 (3.91)4.44 (4.89)
    20 ft × 20 ft400 sq ft4.94 (5.43)6.17 (6.79)
    24 ft × 20 ft480 sq ft5.93 (6.52)7.41 (8.15)
    24 ft × 24 ft576 sq ft7.11 (7.82)8.89 (9.78)
    40 ft × 20 ft800 sq ft9.88 (10.86)12.35 (13.58)

    How thick should a concrete driveway be?

    Many guides treat 4 inches as enough for cars and light vehicles, and suggest 5 to 6 inches for trucks, RVs and other heavy loads. A thicker slab needs more concrete, so the thickness is the number that changes your order the most. Going from 4 to 5 inches adds a quarter to the volume.

    What goes under and inside the slab

    • Gravel base. A compacted crushed-stone layer gives the slab even support and drainage. A common guide is to finish the top 3 to 4 inches with stone no larger than about three-quarters of an inch. In cold climates the base may need to reach below the frost line.
    • Reinforcement. A rebar grid tied at 18 inches centre to centre in both directions is one common layout. Wire or fibre mesh is the alternative. Reinforcement helps hold hairline cracks tight. It does not stop them forming.
    • Edge forms and joints. Boards hold the edges while the concrete sets. Contractors often saw control joints about every 8 to 10 feet so that cracking follows a straight line.

    How much does a concrete driveway cost?

    Prices vary a lot by region, access and finish. These are typical ranges from published US cost guides. Use them as a sanity check on your quotes, not as a price list.

    ItemTypical rangeNotes
    Plain concrete driveway, installed$5 to $7 per sq ftTypical whole-driveway totals run from about $3,200 to $11,500.
    Decorative driveway, installed$8 to $18 per sq ftStamped, coloured or exposed-aggregate finishes.
    Ready-mix concrete$110 to $195 per yd³Depends on region and mix strength. Delivery is often extra.
    Crushed stone for the base$10 to $50 per tonVaries with the stone and how far it travels.
    Wire mesh, materialsAbout $1.00 to $1.50 per sq ftFibre or galvanised steel mesh for a 4 in slab.
    Rebar, installedAbout $2 to $3 per sq ftUsually for 5 to 6 in pours.

    The materials estimate in the calculator comes from your own prices, so it will differ from an installed price. A contractor's quote also covers labor, excavation, finishing, sealing and permits.

    Replacing an old driveway

    If you are replacing a driveway, the calculator gives you the new concrete and base. Demolition, haul-away and disposal of the old slab are priced separately, so ask for them in your quote.

    Poured concrete or a crushed concrete driveway?

    A poured driveway is a slab, which is what this calculator estimates. A crushed concrete driveway is a loose surface made from recycled aggregate. The volume maths is the same, area × depth, so you can enter your depth as the gravel base depth to get a volume. Ask your supplier for the weight per cubic yard of their material.

    Related calculators

    Need to know how heavy the slab is? Use the Concrete Weight Calculator. For the base layer on its own, see the Gravel Under Concrete Slab Calculator.

    FAQ

    Frequently asked questions

    How do I calculate how much concrete I need for a driveway?

    Multiply length × width × thickness, with the thickness in the same unit as the length, then divide cubic feet by 27 to get cubic yards. A 20 ft × 12 ft driveway that is 4 inches thick is 20 × 12 × (4 ÷ 12) = 80 cubic feet, or 2.96 cubic yards. Add about 10% for spills and uneven ground and you should order about 3.26 cubic yards.

    How many cubic yards of concrete do I need for a two-car driveway?

    A 24 ft × 20 ft two-car driveway at 4 inches thick needs 5.93 cubic yards, or about 6.52 cubic yards with 10% extra. At 5 inches thick it needs 7.41 cubic yards, or about 8.15 cubic yards with 10% extra.

    How thick should a concrete driveway be?

    Many guides treat 4 inches as enough for cars and light vehicles, and recommend 5 to 6 inches for trucks, RVs and other heavy vehicles. Commercial driveways are thicker still. Local code, soil and your own vehicles decide the final figure, so check with your contractor.

    How many bags of concrete do I need for a driveway?

    An 80 lb bag of concrete mix yields roughly 0.6 cubic feet, so one cubic yard (27 cubic feet) takes about 45 bags. The 20 ft × 12 ft example above, with 10% extra, needs about 147 bags. That is why most driveways are poured with ready-mix delivered by truck.

    How much does a concrete driveway cost?

    Published US cost guides put a plain concrete driveway at roughly $5 to $7 per square foot installed, and decorative finishes at $8 to $18 per square foot, which gives typical totals from about $3,200 to $11,500. The estimate in this calculator covers materials only, so add delivery, labor, finishing and permits.

    How much does ready-mix concrete cost per cubic yard?

    Guides and supplier price lists show anywhere from about $110 to $195 per cubic yard, depending on region, mix strength and delivery. The calculator starts at $165 per cubic yard. Replace it with the price from your supplier's quote.

    What is a short load fee?

    It is an extra charge many ready-mix suppliers add to small orders, often below about 4 cubic yards. It can be a flat fee or a per-yard surcharge. Ask your supplier before you order, because a small driveway can sit right under the limit.

    Do I need a gravel base under a concrete driveway?

    Driveways are normally poured over a compacted gravel sub-base. One common guide is to finish the top 3 to 4 inches with crushed stone no larger than about three-quarters of an inch. Cold climates may need a deeper base that reaches below the frost line. The calculator starts with a 4 inch base. Set the depth to 0 to leave it out, and follow your local code.

    Should I use rebar or wire mesh?

    Both are used. One common layout is a rebar grid tied at 18 inches centre to centre in both directions, while some contractors prefer wire or fibre mesh. The calculator estimates the length of rebar or the area of mesh, including your extra percentage for laps and overlap. Check local code, or ask an engineer if the driveway will carry heavy loads.

    Does the calculator include removing an old driveway?

    No. If you are replacing a driveway, demolition, haul-away and disposal are priced separately. Get a quote for that work and add it to the materials estimate.

    Can I use this for a crushed concrete driveway?

    A crushed concrete driveway is a loose recycled-aggregate surface, not a poured slab. The volume works the same way (area × depth), so enter your depth as the gravel base depth and read the gravel volume. Ask your supplier how many tons are in a cubic yard of their material.

    Is my data stored or uploaded?

    No. The calculation runs in your browser and nothing you type is sent to a server.