Home/Tools/Gravel Under Concrete Slab Calculator
Calculator Tools

Gravel Under Concrete Slab Calculator

Enter your slab size and base depth to get the gravel you need in tons and cubic yards, with an allowance for compaction, the number of lifts and an estimated cost.

Runs in your browserTons, yards and costImperial and metricFree, no sign-up
By Kalikolom Tools · Last updated:
Units
Calculate
Slab shape

Slab use, typical base depth

Loose stone settles as it is compacted, so order a little extra. Frost-prone areas often need a base of 8 to 24 in or more, so ask a local contractor or engineer about your depth.

Price

The starting values are rough guides. Replace them with the figures from your own quote.

Result— 

Details
Estimated cost
ItemQuantityUnit priceCost

    Estimates only. Stone weight changes with the stone and its moisture, and the right depth depends on your soil, climate and local code. Confirm quantities with your supplier before you order.

    Quick guide

    How to calculate gravel under a concrete slab

    Three steps. Everything updates as you type.

    1

    Enter the slab

    Type the length and width, or a diameter for a round slab, or the area. For an L-shaped slab press Add section and enter each rectangle.

    2

    Pick the base depth

    Tap Patio, Shed or garage, or Driveway for a typical depth, or type your own. Keep the 10% extra for compaction, or change it. Choose your stone to see how it behaves.

    3

    Read the tons and cost

    You get tons, cubic yards, the number of compaction lifts and how far a ton goes. Short on gravel? Switch to Depth I can cover.

    How much gravel do you need under a concrete slab?

    The base under a slab is a flat layer, so the maths is short. Find the compacted volume, add a little extra because loose stone settles when it is compacted, then turn the volume into tons using the weight of your stone.

    Volume = Length × Width × Base depth

    In imperial units, convert the depth from inches to feet by dividing by 12, then divide the cubic feet by 27 to get cubic yards. Crushed stone such as #57 weighs about 2,800 lb per cubic yard, which is 1.4 tons, so multiply the cubic yards by 1.4 to get tons.

    Worked example. A 10 ft × 10 ft slab with a 4 inch base is 10 × 10 × (4 ÷ 12) = 33.3 cubic feet, or 1.23 cubic yards. With 10% extra you would order about 1.36 cubic yards, which is about 1.9 tons. A 12 ft × 12 ft shed slab with a 6 inch base needs 2.67 cubic yards, or about 2.93 with 10% extra, which is about 4.1 tons.

    As a rule of thumb, one ton of crushed stone covers roughly 100 sq ft at 2 inches deep. At 4 inches deep, with 10% extra, one ton covers about 53 sq ft.

    Quick reference: tons of gravel for common slab sizes

    Tons including 10% extra, at 1.4 tons per cubic yard. Use the calculator for your exact size and stone.

    Slab sizeArea4 in base6 in base8 in base
    10 ft × 10 ft100 sq ft1.902.853.80
    12 ft × 12 ft144 sq ft2.744.115.48
    12 ft × 16 ft192 sq ft3.655.487.30
    16 ft × 20 ft320 sq ft6.089.1312.17
    20 ft × 20 ft400 sq ft7.6011.4115.21
    24 ft × 24 ft576 sq ft10.9516.4321.90

    How thick should gravel be under a concrete slab?

    There is no single answer, because the load on the slab, the soil and the climate all change it. These are the ranges guides typically give. Treat them as a starting point and confirm with your local code.

    UseTypical compacted baseNotes
    Patio or walkway4 to 6 inMany small residential slabs use about 4 to 6 in.
    Shed, garage or workshop4 to 8 inUp to 12 in or more for heavy loads or large equipment.
    Residential driveway8 to 18 in in some guidesOthers finish the top 3 to 4 in with crushed stone over a deeper base.
    Frost-prone areas8 to 24 in or moreDepends on climate and soil. Ask a local contractor or engineer.

    Because the depth changes your order so much, the calculator lets you set it exactly. If your slab will carry vehicles, follow the engineer's plan or the contractor's spec rather than a general rule.

    What type of gravel should you use under a concrete slab?

    Use angular, crushed stone. The sharp faces lock together when compacted and make a stable base. Rounded stone does not.

    MaterialHow it behaves under a slab
    Crusher run (dense-graded aggregate)Crushed stone mixed with stone dust. Packs into a stable platform that can be graded fine before the pour. The usual choice for house slabs.
    Crushed stone, ¾ to 1½ inAngular stones that interlock and compact well. Larger sizes give more stability.
    #57 stone (open-graded)Drains well and can work as a capillary break, but does not compact into a tight platform like crusher run.
    One-inch-minus screened gravelStones up to 1 in with fines that help compaction.
    Pea gravelRounded, so it compacts poorly. Not recommended as a compacted base.
    Recycled concrete aggregateWorks like crushed stone, but quality varies by source.

    What size gravel under a concrete slab?

    A common range is crushed stone from three-quarters of an inch to one and a half inches. The top layer is often a finer stone, around three-quarters of an inch, so the base can be graded flat. Ask your supplier which grade they sell for slab bases in your area.

    Sand or gravel under a concrete slab?

    Gravel is the more common choice. Sand drains poorly and compacts only when it is moist, so it suits flexible bases better than a rigid slab. Crushed stone drains better and interlocks.

    Do you need gravel under a concrete slab, and why?

    A compacted gravel base is the usual recommendation. It gives the slab even support, helps water drain away and separates the concrete from wet or soft soil. In freeze and thaw climates a deeper base also reduces the risk of frost heave. Whether it is required depends on your soil, the slab's use and local code, so check with your building department before you skip it.

    How to place and compact the base

    • Prepare the ground. Remove topsoil, roots, mud and loose fill.
    • Place in lifts. Spread the stone in layers of about 3 to 4 inches. This is why the calculator shows the number of lifts for your depth.
    • Compact each lift. Lightly moisten dry stone, then use a plate compactor on every layer.
    • Grade and check. Level with a straightedge, add slope for outdoor slabs, and check the compacted thickness before the pour.
    • Optional fabric. Geotextile fabric can separate the soil from the stone. The calculator shows the area you would need.

    Related calculators

    Planning the slab itself? Try the Concrete Driveway Calculator for concrete, mesh or rebar and cost, or the Concrete Weight Calculator to find out how heavy the finished slab will be.

    FAQ

    Frequently asked questions

    How much gravel do I need under a concrete slab?

    Multiply the slab length × width × the compacted base depth (in feet), then divide by 27 for cubic yards. A 10 ft × 10 ft slab with a 4 inch base is 100 × (4 ÷ 12) = 33.3 cubic feet, or 1.23 cubic yards. Add about 10% for settling and you should order about 1.36 cubic yards, which is roughly 1.9 tons at 1.4 tons per cubic yard.

    How thick should the gravel be under a concrete slab?

    It depends on the use. Guides typically suggest 4 to 6 inches for a patio, 4 to 8 inches for sheds, garages and workshops (up to 12 inches or more for heavy loads), and 8 to 18 inches for a residential driveway in some guides. Cold climates with frost often need 8 to 24 inches or more. Local code and soil decide the final depth, so check with a local contractor or engineer.

    What type of gravel should I use under a concrete slab?

    Angular crushed stone is the usual answer. Crusher run, also called dense-graded aggregate, packs into a stable platform that can be graded fine before the pour. Crushed stone of about three-quarters of an inch to one and a half inches interlocks and compacts well. Open-graded stone such as #57 drains well but does not compact as tightly.

    What size gravel under a concrete slab?

    A common range is crushed stone from three-quarters of an inch to one and a half inches. Larger sizes give more stability. Another choice is one-inch-minus screened gravel, which has fines that help it compact.

    Can I use pea gravel under a concrete slab?

    It is not recommended as a compacted base. Pea gravel is rounded, so the stones roll around instead of locking together, and it compacts poorly. Use crushed, angular stone instead unless a qualified spec says otherwise.

    Is #57 stone good under a concrete slab?

    #57 is an open-graded stone. It drains well and can work as a capillary break when the slab design calls for one, but it does not compact into a tight, trimmable platform the way crusher run does, so it is not the default compacted base.

    Sand or gravel under a concrete slab?

    Gravel is the more common choice. Sand drains poorly and compacts well only when it is moist, so it suits flexible bases better than a slab base. Angular crushed stone gives better drainage and interlock.

    Do you need gravel under a concrete slab?

    A compacted gravel base is the usual recommendation because it gives even support and helps water drain away. Whether it is required depends on your soil, climate, the use of the slab and local code, so ask your local building department. Garage and driveway slabs that carry vehicles should follow the plan or spec, not a guess.

    Why put gravel under a concrete slab?

    A compacted base spreads the load evenly, helps water drain away from the slab, and separates the concrete from wet or soft soil. In freeze and thaw climates a deeper base reduces the risk of frost heave.

    How many tons of gravel are in a cubic yard?

    Crushed stone such as #57 weighs about 2,800 lb per cubic yard, which is 1.4 tons. Across different stones the range is roughly 2,400 to 2,900 lb per cubic yard, depending on stone size, shape and moisture. Ask your supplier for the exact figure and enter it in the calculator.

    How do I compact gravel under a slab?

    Remove topsoil, roots and loose fill first. Place the gravel in lifts of about 3 to 4 inches, lightly moisten dry stone, and compact each lift with a plate compactor. Then grade it, check the thickness with a straightedge, and add geotextile fabric if you want to separate the soil from the stone.

    How much does gravel cost?

    Crushed stone commonly runs from about $10 to $50 per ton, depending on the stone and your region, and delivery is often charged separately. The calculator starts at $30 per ton. Replace it with the price from your supplier.

    Is my data stored or uploaded?

    No. The calculation runs in your browser and nothing you type is sent to a server.